Toshiba Magnia SG30 - Manual (Page 44)

46 Getting Started
Configuring wireless access
5.375 x 8.375 ver 2.1
Configuring wireless features
When the wireless access point option is installed in the
Magnia SG30, wireless access should be possible using the
configured defaults. However, it is recommended that you
review the wireless configuration and modify it as necessary.
1 Open the Administration Web site, click the Network
tab, then select Wireless.
The wireless configuration screen appears.
Sample Wireless configuration screen
2 Select the Enable Wireless Access Point check box to
enable wireless access. Clear the check box to disable
wireless access.
3 In the Network Name box, enter your network name
(sometimes known as the ESSID).
Each wireless client is configured using the same
network name. If there is more than one wireless access
point, the network name determines which access point
each wireless client uses.
4 In the Channel box, select which radio frequency to use
for wireless communications.