Toshiba Magnia SG30 - Manual (Page 104)

109 Establishing an Internet Connection
Connecting the Magnia SG30 to the Internet
5.375 x 8.375 ver 2.1
The Magnia SG30 will use the settings to connect to the
Internet through the cable modem. It will then attempt to
contact several well-known Internet sites.
8 When the Magnia SG30 reports that this process is
successful (which may take a minute or two), click
Finish.
NOTE: Your configuration changes are not made permanent until
you click Finish.
Configuring for DSL-based Internet service
DSL (Digital Subscriber Line) service is available from
various ISPs. It can provide always connected and extremely
fast (broadband) access to the Internet. You can connect the
Magnia SG30 to a DSL modem using its public Ethernet port.
When configuring the Magnia SG30 for a DSL Internet
connection, you will need information such as:
❖ Whether your ISP has provided a specific IP address
(static IP), or whether your server will obtain a new IP
address each time it connects (DHCP). If you don’t know,
use DHCP or call your ISP.
❖ Whether your ISP uses PPPoE (PPP over Ethernet) to
connect to its network. If so, you may need to enter an
account name and password.
❖ If your ISP has given you a static IP, you will also need
the following information:
❖ IP address
❖ Subnet mask
❖ Primary DNS Server
❖ Secondary DNS Server (optional)
❖ Default gateway (optional)