Toshiba Magnia SG30 User Manual
Page 45
47
Getting Started
Configuring wireless access
5.375 x 8.375 ver 2.1
This same frequency must also be specified in each
wireless client’s configuration.
5
Select the Enable Data Encryption check box to
encrypt information sent between wireless clients and the
Magnia SG30. Clear the check box to disable encryption.
This feature is known as Wired Equivalent Privacy
(WEP).
6
If you enabled data encryption in
, click the
Configure hyperlink next to the Enable Data
Encryption check box to set up or modify the required
encryption keys (passwords).
See
“Configuring Wired Equivalent Privacy (WEP) keys”
for further instructions.
7
Select the Enable Access Control check box to specify
the wireless clients that can access your network, using
each client’s unique network card MAC address.
This security feature allows only the specified clients to
access the network through the wireless access point. See
“Configuring access control” on page 49
for further
instructions.
8
Select the Enable SSL (Secure Sockets Layer) check box
to use HTTPS (Secure Hyper Text Transfer Protocol) to
encrypt your usage of the Administration Web Site and
the Digital Central Web Site.
The primary purpose of this feature is to add another
layer of security to help prevent an unauthorized user on
your wireless network from changing settings in the
Administration Web Site or Digital Central Web Site.
There are additional advanced wireless configuration options.
To view and modify these options, click the Advanced
Settings hyperlink next to the Enable Wireless Access Point
check box.