Toshiba Magnia SG30 User Manual
Page 51
53
Getting Started
Configuring wireless access
5.375 x 8.375 ver 2.1
The Advanced Configuration screen appears.
Sample Advanced Configuration screen
Select the Reject clients using the network name ANY box
to reject connections from wireless clients with a network
name (ESSID) of “ANY.” If you clear this check box, the
Magnia SG30 accepts connections from wireless clients with
a network name of “ANY,” in addition to wireless clients
with a network name that matches the configured local
network name. (See
“Configuring wireless features” on
for information on configuring the local network
name.)
The Distance between access points option prevents overlap
of access point service regions when multiple access points
are used. This value should not be changed unless the
Magnia SG30 is part of a network of wireless access points.
The Multicast Rate option applies to multicast
environments, which exist in some corporate networks that
have multiple access points. Typically, this value should not
be changed, as the default multicast rate of 2 Mbit/s is
supported by all wireless network interfaces. However, you
may want to use higher multicast rates when all of the
following conditions exist:
❖
Your network environment includes wireless Turbo PC
Cards only.