Toshiba Magnia SG30 - Manual (Page 182)

189 Managing the Server
Configuring a Shared Printer
5.375 x 8.375 ver 2.1
Configuring a Shared Printer
The Magnia SG30 will act as a print server for a local printer
or a networked attached printer. Configuring a printer in this
way allows you to share a single printer for all client
computers in your local network. The Magnia SG30 will
accept print jobs from the client computers, and queue them
to be sent to the shared printer.
Configuration of the shared printer is simple. A direct
connect USB printer is supported by default. Simply connect
the printer to the Magnia SG30 USB port and configure your
clients for its use.
Sample shared printer screen
To use a network printer:
1 Connect the printer to one of the ports of the built in
Ethernet switch.
2 Access the Administrative Web site.
3 Click the System tab, and then select the Printer menu
option.
4 Select “Use Network Printer”.
5 Note the IP address of the network printer, and click
Apply to save the settings.