Toshiba Magnia SG30 - Manual (Page 81)

85 Setting Up Your Local Area Network
Planning your network
5.375 x 8.375 ver 2.1
❖ Near liquids or corrosive chemicals
CAUTION: If debris or liquid gets in the Magnia SG30, shut it
down, set the Power/Shutdown button to Off, and unplug the
power cable from the AC outlet.
Do not turn the unit back on. Contact an authorized Toshiba
service provider immediately.
Power requirements
Before plugging the power cable into a wall outlet, make sure
the AC power source and the over-current protector (circuit
breaker current rating) are sufficient to handle the
requirements of the Magnia SG30.
To ensure a continuous supply of power, Toshiba recommends
the use of an Uninterruptable Power Supply (UPS).
WARNING: To ensure proper grounding of the Magnia SG30 and
avoid a possible fire hazard, only use the power cable provided.
Set the power supply setting on the back of the Magnia SG30
to match your local voltage requirement.
Power supply setting
Power supply setting