Toshiba Magnia SG30 - Manual (Page 183)

190 Managing the Server
Viewing server status
5.375 x 8.375 ver 2.1
When configuring a network printer connected through
Ethernet, be sure to configure the printer for a static IP, and
make sure this IP address matches the one displayed on the
Printer configuration screen in the Web Administration site.
Viewing server status
You can obtain information about the general operation and
status of your Magnia SG30 from the Administration Web
site. A general system report is displayed when you first enter
the Administration Web site as shown below.
Example of the System Status Report
The green bullets to the left of each item can indicate whether
there are cautions or problems with the system. In this
example, the Backup item is yellow because no backups have
been taken. The firewall item is also yellow, because the
firewall has been turned off (which is a potential security
risk).
The hyperlinks in each item can be used to display more
information.
More detailed information is presented on the following
menu tabs: