Toshiba Magnia SG30 - Manual (Page 72)

75 Using the Network
Sharing a printer
5.375 x 8.375 ver 2.1
❖ For Manufacturer and Printer, select from the lists
provided.
To use your device driver diskette, click Have Disk,
and follow the directions on screen.
4 Print a test page to verify that the printer is configured
correctly.
Procedures for the Windows 98 operating system
This example uses the Windows 98 operating system. The
process is very similar on other Windows operating systems.
1 Click Start, Settings, then Control Panel.
The Control Panel window opens.
2 Double-click Printers.
The Printers window opens, listing the network printer
and any local printer connected to your computer.
3 Double-click the Add Printer icon, and select the
Network printer option.
4 Type the name of your Magnia SG30 (the default is
“Myserver”) or use Browse to find the server and printer.
The name of the shared network printer on the
Magnia SG30 is “printer.”
The Windows Add Printer Wizard continues with the
printer driver installation process.
5 Install the driver on your client computer as you would
for any printer connected locally.
Once your client computer has been configured for the
printer, you may use the network printer just like any printer
connected directly to your computer.