Toshiba Magnia SG30 - Manual (Page 20)

22 Getting Started
Quick start procedure
5.375 x 8.375 ver 2.1
Quick start procedure
If you have already planned your network and are an
experienced computer user, this section should provide all the
information you need. Otherwise, read
“Planning your
network” on page 79 before installing the Magnia SG30, and
begin the installation process with “Unpacking the Magnia
SG30” on page 24 .
The basic steps for installing the Magnia SG30 are:
1 Unpack all components.
2 Assemble the additional components you will need:
network cables or wireless network card for client
computers, printer cable (if you’re connecting a network
printer), and telephone cable or Ethernet
®
cable (for
connecting to the Internet).
3 Locate and identify all ports.
For more information, see “Finding your way around” on
page 25 .
4 Turn on the Magnia SG30.
5 Connect the first client computer.
6 Connect a printer to the USB port on the Magnia SG30
(optional).
7 Connect the Magnia SG30 to your Internet connection
(such as phone line to the modem, Ethernet connection
from cable or DSL modems to the public Ethernet port).
8 Run the Client Setup Wizard on the client computer.
(Insert the Toshiba Magnia SG30 "Client Setup- and
Documentation CD". The CD program runs
automatically after the Client Setup Wizard has finished
and when you have activated the "Autostart Option" on
your PC.) Select the option Connect this PC to your
Magnia SG30.