Connecting a printer to the magnia sg30 (optional), Connecting a printer to the magnia sg30 – Toshiba Magnia SG30 User Manual
Page 28
30
Getting Started
Connecting a printer to the Magnia SG30 (optional)
5.375 x 8.375 ver 2.1
Connecting a printer to the Magnia SG30
(optional)
An important feature of the Magnia SG30 is that it allows all
users on the network to share the same printer, rather than
having a printer connected to each individual computer. Each
user can submit print jobs, which will be queued on the
Magnia SG30 to be printed in the order received.
Connect the printer’s data cable to the Magnia SG30’s USB
printer port. (If your printer uses a parallel cable instead of
USB, a USB to parallel converting cable is required to
connect with the Magnia SG30).
A printer connected to the USB port
The Magnia SG30 supports both the direct connect USB
printer connection, or a network printer connection. If you
have a network printer, you can configure the Magnia SG30
to send print jobs to this network printer instead of
connecting it directly to the server. If you are connecting a
printer directly to the Magnia SG30’s USB printer port, you
don’t need to configure the printer on the Magnia SG30. If
the printer is a network printer, connected to a local network
connection, you will have to configure the Magnia SG30 to
redirect print jobs to the printer. See
.
USB port