Toshiba Magnia SG30 - Manual (Page 186)

193 Managing the Server
Viewing server health status
5.375 x 8.375 ver 2.1
You can view even more detailed information by clicking the
hyperlinks for any of the topics.
Hard drive status
The Magnia SG30 hard drives are “SMART” drives. They
have built in capabilities to self-monitor performance. They
use this information to detect subtle changes in performance
and predict if the drive is likely to fail in the future. If a
failure is predicted for a drive, this will be displayed in the
health status section of the Administration Web site as well as
the LCD.
If the health status system indicates there is a problem with a
hard drive, stop using the server immediately. If possible,
perform a backup of the current user files on the hard drive,
and contact Toshiba or your supplier to obtain a replacement
disk.
Example of the Disk Drive report
Fan status
The Magnia SG30 uses several internal fans to assure that it
is cooled properly. These fans are monitored to make sure
they are operating properly. If one of the fans slows below an
acceptable RPM, or stops spinning, the health monitoring
system will detect the failure and alert you on the LCD panel
and in the Administration Web site.