Toshiba Magnia SG30 - Manual (Page 229)

239
5.375 x 8.375 ver 2.1
Chapter 10
If Something Goes
Wrong
Some problems you may encounter when using your Toshiba
Magnia SG30 Appliance Server are relatively easy to identify
and solve. Others may require help from your dealer or
Toshiba.
Problems when you turn on the Magnia SG30
The LCD panel remains dim and does not brighten.
Make sure you attached the power cable properly at both
ends.
Unplug the Magnia SG30 and plug it back in again.
The LCD display brightens, but does not display the
“Magnia SG30” message.
The initial power to the Magnia SG30 did not fully trigger the
warming up process. You should unplug the Magnia SG30,
and then plug it back in. If the problem repeats itself, use a
pen or paperclip to push the reset button that resides inside
the tiny reset hole on the back panel of the Magnia SG30.