Allied Telesis AT-S60 - Manual (Page 69)

AT-S60 Command Line User’s Guide
67
SHOW SNTP
Syntax
show sntp
Parameters
None.
Description
This command displays the following information:
❑ Status
❑ Server IP address
❑ UTC Offset
❑ Daylight Savings Time (DST) - enabled or disabled
❑ Poll Interval
❑ Last Delta - The last adjustment that was applied to the system
time. It is the drift in the system clock between two successive
queries to the SNTP server.
Example
The following command displays SNTP information:
show sntp