beautypg.com

Enable garp – Allied Telesis AT-S60 User Manual

Page 205

background image

AT-S60 Command Line User’s Guide

203

ENABLE GARP

Syntax

enable garp=gvrp [gip]

Parameters

garp

Specifies the GARP application you want to enable.

The only GARP application supported by AT-S60
management software is GVRP.

gip

Enables GARP Information Propagation (GIP).

Note

The online help for this command contains an STP option. The
option is not supported.

Description

This command enables GVRP on the switch. Once activated, the switch
will learn dynamic GVRP VLANs and dynamic GVRP ports.

This command can also be used to enable GIP.

Examples

This commands enables GVRP on the switch:

enable garp=gvrp

This command enables GIP only:

enable garp=gvrp gip

See also other documents in the category Allied Telesis Computer hardware: