Allied Telesis AT-S60 - Manual (Page 199)

AT-S60 Command Line User’s Guide
197
SET SWITCH SWITCHMODE
Syntax
set switch switchmode=basic|tagged
Parameter
vlanmode Controls the switch’s VLAN mode. Options are:
tagged Configures the switch to support port-
based and tagged VLANs as well as the
multiple VLAN modes.
basic Configures the switch for the Basic VLAN
mode. The default is TAGGED.
Description
This command configures a switch to support port-based and tagged
VLANs as well as the multiple VLAN modes, or the Basic VLAN mode.
Only one mode can be active on a switch at a time.
Note
Refer to the AT-S60 Management Software User’s Guide for
background information on tagged and port-based VLANs, Basic
VLAN mode, multiple VLAN modes.
Example
The following command configures the switch to support the Basic
VLAN mode:
set switch switchmode=basic