Allied Telesis AT-S60 - Manual (Page 181)

AT-S60 Command Line User’s Guide
179
edgeport Defines whether the port is functioning as an edge
port. An edge port is connected to a device
operating at half-duplex mode and is not
connected to any device running STP or MSTP.
Selections are:
yes The port is an edge port. This is the
default.
no The port is not an edge port.
pointtopoint Defines whether the port is functioning as a point-
to-point port. This type of port is connected to a
device operating at full-duplex mode. Selections
are:
yes The port is an point-to-point port.
no The port is not an point-to-point port.
autoupdate The port’s status is determined
automatically. This is the default.
Table 10 Port Priority Value Increments
Increment
Port
Priority
Increment
Port
Priority
0 0 8 128
1 16 9 144
2 32 10 160
3 48 11 176
4 64 12 192
5 80 13 208
6 96 14 224
7 112 15 240