Allied Telesis AT-S60 - Manual (Page 216)

Chapter 17: GARP VLAN Registration Protocol Commands
214
SHOW GARP MACHINE
Syntax
show garp=gvrp machine
Parameter
garp Specifies the GARP application you want to display.
The only GARP application supported by AT-S60
management software is GVRP.
Note
The online help for this command contains an STP option. The
option is not supported.
Description
This command displays the following parameters for the GID state
machines for the GARP application. The output is shown on a per-GID
index basis; each attribute is represented by a GID index within the GARP
application.
❑ VLAN
❑ Port
❑ App
❑ Reg
Example
The following command displays GID state machines for all GARP
applications:
show garp=gvrp machine