beautypg.com

Set asyn – Allied Telesis AT-S60 User Manual

Page 43

background image

AT-S60 Command Line User’s Guide

41

SET ASYN

Syntax

set asyn speed=1200|2400|4800|9600|19200|38400|
57600|115200

Parameter

speed

Sets the speed of the serial port on the AT-8401
management card. The default is 9600 bps.

Description

This command sets the baud rate of the serial port on the AT-8401
management card. The serial port is used for local management of the
switch.

Note

Changing the baud rate of the serial port ends your management
session if you are managing the switch locally. To reestablish a local
management session, you must change the speed of the terminal
(or the terminal emulator program) to match the speed of the serial
port.

Example

This example sets the baud rate to 115,200 bps:

set asyn speed=115200

See also other documents in the category Allied Telesis Computer hardware: