Allied Telesis AT-S60 - Manual (Page 136)

Chapter 12: File Download and Upload Commands
134
UPLOAD
Syntax
upload method=tftp|xmodem destfile=filename
server=ipaddress file=filename
Parameter s
method Specifies the method of the upload. The options are:
tftp Specifies a TFTP upload. To use
this option, there must be TFTP
server software on a network
node. You can use this option
from either a local or Telnet
management session.
xmodem Indicates that the upload will be
performed using Xmodem. This
option is supported only from a
local management session.
destfile Specifies the path and filename where the file is to
be saved on the TFTP server. This parameter is used
with a TFTP upload.
server Specifies the IP address of the network node
containing the TFTP server software. This parameter
is used with a TFTP upload.
file Specifies the name of the file you are uploading
from the switch.
Description
This command can upload any of the following types of files from a
switch to a management workstation or TFTP server:
❑ AT-S60 software image
❑ Configuration file
❑ Public key certificate
❑ Public key certificate enrollment request
❑ Encryption key