Allied Telesis AT-S60 - Manual (Page 52)

Chapter 3: Basic Switch Commands
50
SHOW ASYN
Syntax
show asyn
Parameters
None.
Description
This command displays the following operating parameters of the serial
port on the AT-8401 management card:
❑ Baud rate
❑ Parity
❑ Data bits
❑ Stop bits
Of the above values, only the baud rate is adjustable on the serial port.
To change it, refer to SET ASYN on page 41.
Example
The following command displays the operating parameters of the serial
port:
show asyn