Allied Telesis AT-S60 - Manual (Page 234)

Chapter 20: Statistics Commands
232
SHOW SWITCH PORT COUNTER
Syntax
show switch port=port counter
Parameter
port Specifies the port whose statistics you want to view.
You can view more than one port at a time. To view all
ports, do not specify a port.
Description
This command displays the operating statistics for a port on the switch.
Examples of the statistics include the number of packets transmitted
and received, and the number of CRC errors. For a list of and definitions
for the statistics, refer to the AT-S60 Management Software User’s
Guide.
Examples
The following command displays the operating statistics for Port 4 on
the line card in Slot 6:
show switch port=6.4 counter
The following command displays the operating statistics for all ports:
show switch port counter