Allied Telesis AT-S60 - Manual (Page 107)

AT-S60 Command Line User’s Guide
105
ADD SWITCH TRUNK
Syntax
add switch trunk=name port=ports
Parameters
trunk Specifies the name of the port trunk to be modified.
The name is case-sensitive.
port Specifies the port to be added to the port trunk. You
can add more than one port at a time. (For information
on how to enter ports, refer to Specifying Ports on
page 17.)
Description
This command adds ports to an existing port trunk.
Note
To initially create a port trunk, refer to CREATE SWITCH TRUNK on
page 106.
Example
The following command adds Port 5 on the line card in Slot 2 to a port
trunk called load22:
add switch trunk=load22 port=2.5