Allied Telesis AT-S60 - Manual (Page 17)

AT-S60 Command Line User’s Guide
15
Starting a Management Session
In order to manage an AT-8400 Series switch using the command line,
you must first start a local or Telnet management session. For
instructions, refer to the AT-S60 Software Management User’s Guide.
Once you have started a local or Telnet management session, you will
see the AT-S60 Main Menu, which contains the following option:
C - Command Line Interface
Type C to display the command line prompt. The prompt will differ
depending on whether you logged in as Manager or Operator. If you
logged in as Manager, you will see a pound sign “#.” If you logged in as
Operator, you will see a dollar sign “$.” You can now manage the switch
with the command line commands.
Note
The command line interface is not supported by a Web browser
management session.