Allied Telesis AT-S60 - Manual (Page 157)

AT-S60 Command Line User’s Guide
155
❑ Forwarding delay
❑ Maximum age time
❑ Port priority
❑ Force version of STP or normal RSTP
Examples
The following command returns all RSTP parameter settings to their
default values:
set rstp default
The following command sets the bridge priority to 20480 (increment 5),
the hello time to 5 seconds, and the forwarding delay to 20 seconds:
set rstp priority=5 hellotime=5 forwarddelay=20
The following command uses the FORCEVERSION parameter to
configure the bridge to use the RSTP parameters but to transmit only
STP BPDU packets:
set rstp forceversion=forcestpcompatible