Allied Telesis AT-S60 - Manual (Page 249)

AT-S60 Command Line User’s Guide
247
SET ENCO KEY
Syntax
set enco key=key-id [description=description-
string]
Parameters
key A number in the range 0 to 65535.
description A character string, 1 to 25 characters in length. Valid
characters are any printable character. To add spaces
to this parameter spaces, enclosed them in double
quotes.
Description
This command changes the user-defined description for a specified key.
The KEY parameter specifies the identification number for the key. The
specified encryption key must already exist. See CREATE ENCO KEY on
page 243.
The DESCRIPTION parameter specifies a user-defined description of the
key, to make it easier to keep track of different keys.
Example
This command specifies the description for key 1:
set enco key=1 description=”switch z key”