Allied Telesis AT-S60 - Manual (Page 48)

Chapter 3: Basic Switch Commands
46
SET PASSWORD OPERATOR
Syntax
set password operator
Parameters
None.
Description
This command sets the operator’s password. The default password is
“operator.” The password can be from 1 to 20 alphanumeric characters.
Allied Telesyn International recommends avoiding special characters,
such as spaces, asterisks or exclamation points, since some web
browsers do not accept them in passwords. The password is case
sensitive.
Example
The following command changes the operator’s password:
set password operator
Follow the prompts to enter the new password.