Allied Telesis AT-S60 - Manual (Page 148)

Chapter 13: STP Commands
146
Description
This command configures the following STP parameter settings for a
switch port:
❑ Port cost
❑ Port priority
Example
The following command sets the port cost to 15 and the port priority to
192 (increment 12) for Port 6 on the line card in Slot 10:
set stp port=10.6 portcost=15 portpriority=12
Table 4 Port Priority Value Increments
Increment
Bridge
Priority
Increment
Bridge
Priority
0 0 8 128
1 16 9 144
2 32 10 160
3 48 11 176
4 64 12 192
5 80 13 208
6 96 14 224
7 112 15 240