Allied Telesis AT-S60 - Manual (Page 285)

AT-S60 Command Line User’s Guide
283
SHOW PORTACCESS
Syntax
show portaccess config|status|[port=port
[authenticator|supplicant] [config|status]]
Parameters
config Displays whether port-based access control is
enabled or disabled on the switch.
status Displays the role and status for each port.
port Displays the port access status settings for a specific
port.
Description
Use this command to display port-based access control information.
Examples
The following command displays whether port-based access control is
enabled or disabled on the switch:
show portaccess config
This command displays the port role and status for each port:
show portaccess status
This command displays the status for Port 1 on the line card in Slot 6:
show portaccess status port=6.1
This command displays the configuration of supplicant port 1.2:
show portaccess port=1.2 supplicant config