Allied Telesis AT-S60 - Manual (Page 177)

AT-S60 Command Line User’s Guide
175
SET MSTP MSTI
Syntax
set mstp msti mstiid=mstiid priority=priority]
Parameters
mstiid Specifies a MSTI ID. You can specify only one MSTI ID
at a time. The range is 1 to 15.
priority Specifies the MSTI priority value for the switch. The
range is 0 to 61,440 in increments of 4,096. The range
is divided into sixteen increments, as shown in the
following table. You specify the increment that
represents the desired bridge priority value. The
default value is 32,768, which is increment 8.
Description
This command changes the MSTI priority value of a spanning tree
instance on a bridge. This value is used in determining the regional root
bridge of a spanning tree instance.
The MSTIID parameter specifies the MSTI ID whose MSTI priority you
want to change. The range is 1 to 15.
Table 9 MSTI Priority Value Increments
Increment
MSTI
Priority
Increment
MSTI
Priority
0 0 8 32768
1 4096 9 36864
2 8192 10 40960
3 12288 11 45056
4 16384 12 49152
5 20480 13 53248
6 24576 14 57344
7 28672 15 61440