Allied Telesis AT-S60 - Manual (Page 131)

AT-S60 Command Line User’s Guide
129
LOAD
Syntax
load method=tftp|xmodem|remoteswitch
destfile=filename server=ipaddress file=filename
switchlist=switches
Parameters
method Specifies the method of download. Options are:
tftp Specifies a TFTP download. To use
this option, there must be a
network node with TFTP server
software. The file to download
onto the switch must be stored on
the TFTP server. You can use the
TFTP option from either a local or
Telnet management session.
xmodem Specifies an Xmodem download
via a local management session.
This download can only upgrade
the switch to which the
management station is
connected. You cannot use this
option to upgrade other switches
in an enhanced stack. You can
only use this option from a local
management session.
remoteswitch Indicates that the download will
be from a master switch to other
switches in an enhanced stack.
This option must be used with the
SWITCHLIST option. (The
REMOTESWITCH option can only
be used from a master switch.)