Allied Telesis AT-S60 - Manual (Page 214)

Chapter 17: GARP VLAN Registration Protocol Commands
212
SHOW GARP DATABASE
Syntax
show garp=gvrp database
Parameters
garp Specifies the GARP application you want to display.
The only GARP application supported by AT-S60
management software is GVRP.
Note
The online help for this command contains an STP option. The
option is not supported.
Description
This command displays the following parameters for the internal
database for the GARP application. Each attribute is represented by a
GID index within the GARP application.
❑ GARP Application
❑ GID Index
❑ Attribute
❑ Used
Example
The following command displays the database for all GARP applications:
show garp=gvrp database