Allied Telesis AT-S60 - Manual (Page 186)

Chapter 16: VLAN and MVLAN Commands
184
ADD VLAN
Syntax 1
add vlan=name [vid=vid] port=ports|all
frame=untagged|tagged
Syntax 2
add vlan=name [vid=vid] taggedports=ports|all
untaggedports=ports|all
Parameters
vlan Specifies the name of the VLAN you want to modify.
vid Specifies the VID of the VLAN you want to modify. This
parameter is optional.
port Specifies the ports (that is, slot.port) to be added to
the VLAN. To include all ports on the switch in the
VLAN, use ALL. This parameter must be used with the
FRAME parameter. (For information on how to specify
ports, refer to Specifying Ports on page 17.)
frame Identifies the new ports as either tagged or untagged.
This parameter must be used with the PORT
parameter.
taggedports Specifies the ports (that is, slot.port) to be added as
tagged ports to the VLAN. To include all ports on the
switch as tagged ports in the VLAN, use ALL. (For
information on how to specify ports, refer to
Specifying Ports on page 17.)
untaggedports Specifies the ports (that is, slot.port) to be added as
untagged ports to the VLAN. Specifying ALL adds all
ports on the switch as untagged ports to the VLAN.
Description
This command adds tagged and untagged ports to an existing port-
based or tagged VLAN.
Note
To initially create a VLAN, see CREATE VLAN on page 187. To
remove ports from a VLAN, see DELETE VLAN on page 191.