beautypg.com

Disable switch mirror – Allied Telesis AT-S60 User Manual

Page 119

background image

AT-S60 Command Line User’s Guide

117

DISABLE SWITCH MIRROR

Syntax

disable switch mirror=destinationport

Parameter

mirror Specifies

the

destination port of the port mirror to be

disabled.

Description

This command disables a port mirror. The source ports continue to
forward traffic to and from their respective end nodes, but no traffic is
copied to the destination port of the port mirror.

A port mirror is enabled when created. To view the current status of a
port mirror, refer to SHOW SWITCH MIRROR on page 120.

Example

The following command disables the port mirror that is using Port 7 on
the line card in Slot 2 as the destination port:

disable switch mirror=2.7