Allied Telesis AT-S60 - Manual (Page 101)

AT-S60 Command Line User’s Guide
99
SHOW SWITCH PORT
Syntax
show switch port[=port]
Parameters
port Specifies the port whose parameter settings you
want to view. You can specify more than one port at
a time. (For information on how to enter ports, refer
to Specifying Ports on page 17.) If you do not
specify a port, all ports are displayed.
Description
This command displays a port’s operating parameters, such as speed
and duplex mode.
Examples
The following command displays the operating settings for all ports:
show switch port
The following command displays the operating settings for Port 4 on the
line card in Slot 6:
show switch port=6.4