Allied Telesis AT-S60 - Manual (Page 30)

Chapter 3: Basic Switch Commands
28
❑ SET SYSTEM on page 48
❑ SET SYSTEM TEMPTHRESHOLD on page 49
❑ SHOW ASYN on page 50
❑ SHOW CONFIG on page 51
❑ SHOW DHCPBOOTP on page 52
❑ SHOW IP on page 53
❑ SHOW IP ROUTE on page 54
❑ SHOW SWITCH on page 55
❑ SHOW SWITCH LINECARD on page 56
❑ SHOW SYSTEM on page 57
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
Refer to the AT-S60 Management Software User’s Guide for
background information on basic switch parameters.