Allied Telesis AT-S60 - Manual (Page 227)

AT-S60 Command Line User’s Guide
225
SHOW IP IGMP
Syntax
show ip igmp [hostlist] [routerlist]
Parameters
hostlist Displays a list of the multicast groups learned by
the switch, as well as the ports on the switch that
are connected to host nodes.
routerlist Displays the ports on the switch that are
connected to multicast routers.
Description
This command displays the following IGMP parameters:
❑ IGMP snooping status
❑ Multicast host topology
❑ Host/router timeout interval
❑ Maximum multicast groups
❑ Multicast router ports
Note
For instructions on how to set the IGMP parameters, refer to SET IP
IGMP on page 223.
Examples
The following command displays the current IGMP parameter settings:
show ip igmp
The following command displays a list of host nodes:
show ip igmp hostlist