beautypg.com

Enable switch mirror – Allied Telesis AT-S60 User Manual

Page 120

background image

Chapter 10: Port Mirroring Commands

118

ENABLE SWITCH MIRROR

Syntax

enable switch mirror=destinationport

Parameter

mirror Specifies

the

destination

port of the port mirror to be

enabled.

Description

This command enables a port mirror. Traffic from the source ports is
again copied to the destination port.

A port mirror is enabled when created. You would use this command if
you had disabled a port mirror with the DISABLE SWITCH MIRROR
command.

Example

The following command enables the port mirror that is using Port 5 on
the line card in Slot 7 as the destination port:

enable switch mirror=7.5