Allied Telesis AT-S60 - Manual (Page 51)

AT-S60 Command Line User’s Guide
49
SET SYSTEM TEMPTHRESHOLD
Syntax
set system tempthreshold=temperature
Parameter
The parameter is defined below:
tempthreshold Specifies the maximum operating temperature for the
switch. The range is 0
° to 90 ° C. The default is 80 ° C.
Description
This command sets the switch’s maximum operating temperature. If the
switch exceeds the temperature, the AT-S60 management software
sends a trap to the management workstations.
Example
The following command sets the switch’s maximum operating
temperature to 75
° C:
set system tempthreshold=75