Allied Telesis AT-S60 - Manual (Page 172)

Chapter 15: MSTP Commands
170
RESET MSTP
Syntax
reset mstp
Parameters
None.
Description
This command returns all MSTP bridge and port parameters settings to
their default values.
In order for you to use this command, MSTP must be the active spanning
tree protocol on the switch and the protocol must be disabled. To select
MSTP as the active spanning tree protocol on the switch, see ACTIVATE
MSTP on page 163. To disable MSTP, refer to DISABLE MSTP on page
168.
Example
The following command resets the MSTP bridge and port parameter
settings:
reset mstp