Allied Telesis AT-S60 - Manual (Page 198)

Chapter 16: VLAN and MVLAN Commands
196
SET SWITCH MANAGEMENTVLAN
Syntax
set switch managementvlan=name|VID
Parameter
managementvlan Specifies the management VLAN. You can specify
the VLAN by name or by its VID. You can specify
only one management VLAN. The default
management VLAN is Default_VLAN (VID 1).
Description
This command sets the management VLAN. The switch uses this VLAN to
watch for management packets from Telnet and web browser
management sessions. For more information on the function of the
management VLAN, refer to the AT-S60 Management Software User’s
Guide. To determine the current management VLAN, use the SHOW
SWITCH command.
Example
The following command sets the TechSupport VLAN as the
management VLAN:
set switch managementvlan=TechSupport