Allied Telesis AT-WL2411 User Manual
Page 90
Configuring the Spanning Tree
90
RFC1042/DIX Conversion
Determines how the access point will handle the conversion of
RFC1042/DIX frames that are received on its 802.11b ports.
Enabled
Causes frames received on an 802.11b port with a protocol type
equal to a value in the “RFC1042 types to pass through” list to be
forwarded without conversion. If the frame has a protocol types
that is not found in the list, it will be converted to DIX format
before it is forwarded.
Disabled
Causes frames received on an 802.11b port to be forwarded
without conversion; that is, when a SNAP frame is received from
an 802.11b radio with an OUI (Organizationally Unique Identifier)
equal to 000000, it will be forwarded without conversion.
RFC1042 Types to Pass Through
If the RFC1042/DIX Conversion field is Enabled, this parameter
specifies values for protocol types that are to be passed without
conversion. The list includes the Apple Talk protocol type, value
80F3.
Values entered in this parameter represent the protocol types of
frames that will be passed without conversion to DIX format.
3. Select Submit Changes to save your changes. To activate your
changes, select Save/Discard Changes from the menu bar then Save
Changes and Reboot. For help, see