Allied Telesis AT-WL2411 - Manual (Page 43)

AT-WL2411 Version 1.80 Installation and User’s Guide
43
Using a Web Browser
After you have configured the IP address and other basic network
parameters as described in
Assigning an IP Address on page 41, you can
manage your access point using a Web browser.
You must know the IP Address of the access point to manage it remotely.
If a DHCP server assigned the IP Address, you must determine the IP
Address from the DHCP server.
Only one session can be active on the access point at a time. If your
session terminates abruptly or a new sign-on screen appears, someone
else may be using the access point.
When using the Web to establish remote management of your access
point, follow these guidelines:
❑ Your session will terminate if it is not used for 15 minutes
❑ Console Command mode is not available
To establish a Web browser session with the AT-WL2411, perform the
following procedure:
1. Type the DHCP server-assigned IP Address or the IP Address you
assigned to the AT-WL2411 in the address field of your Web browser.
Note
If you access the Internet using a proxy server, you must add the IP
Address to your exceptions list. The exceptions list contains the
addresses that you do not want to use with a proxy server.
2. Press . The Access Point Login screen as shown in Figure 13 is
displayed.