Allied Telesis AT-WL2411 - Manual (Page 78)

Configuring the Spanning Tree
78
Configuring the Spanning Tree Parameters
Access points automatically configure themselves into a self-organized
network using a spanning tree topology. As devices are added to or
removed from the network, the access points automatically reconfigure
to maintain reliable operation. The spanning tree provides efficient,
loop-free forwarding of frames through the network and allows rapid
roaming of wireless end devices.
To configure the spanning tree parameters, perform the following
procedure:
1. From the Main Menu, select Spanning Tree Settings. The Spanning
Tree Settings screen as shown in Figure 28 is displayed.
Figure 28 Spanning Tree Settings Screen
2. Configure the spanning tree parameters. The spanning tree
parameters are defined below.
AP Name
Enter a unique name for this access point. The name can be from
1 to 16 characters. The default is the access point serial number.