Allied Telesis AT-WL2411 - Manual (Page 126)

Configuring the IEEE 802.11b Radio
126
Configuring
802.11b Point-
to-Point Bridges
Parameters
The 802.11b Point-to-Point Bridge parameters are described in Table 4.
Table 4 Point-to-Point Parameters
Even though WEP encryption is not required for this configuration, Allied
Telesyn recommends that you always implement some type of security.
Screen Parameter
Bridge - Primary
LAN (Root)
Bridge - Secondary
LAN (Designated
Bridge)
IEEE 802.11b
Radio Node Type
SSID
Master
Manufacturing
Station
Manufacturing
Spanning
Tree Settings LAN ID
Root Priority
Ethernet
Bridging
Enabled
Secondary LAN
Bridge Priority
Secondary LAN
Outbound
Flooding
0
5
Checked
0
Disabled
0
0
Checked
1
Enabled