Allied Telesis AT-WL2411 - Manual (Page 72)

Configuring the Ethernet Network
72
DIX-IP-UDP-Port
Port value in hexadecimal.
DIX-IP-Protocol
Protocol number in hexadecimal.
DIX-IPX-Socket
Socket value in hexadecimal.
DIX-EtherType
Specify the registered DIX type in hexadecimal.
SNAP-IP-TCP-Port
Port value in hexadecimal.
SNAP-IP-UDP-Port
Port value in hexadecimal.
SNAP-IP-Protocol
Port value in hexadecimal.
SNAP-IPX-Socket
Socket value in hexadecimal.
SNAP-EtherType
SNAP type in hexadecimal. To filter on both SNAP type and OUI,
use advanced filters.
802.3-IPX-Socket
Socket value in hexadecimal.
802.2-IPX-Socket
Socket value in hexadecimal.
802.2-SAP
802.2 SAP in hexadecimal.
4. In the Value field enter the two hex pairs.
5. Select Submit Changes to save your changes. To activate your
changes, select Save/Discard Changes from the menu bar then Save
Changes and Reboot. For help, see
Saving Your Configuration
Changes on page 46.