Allied Telesis AT-WL2411 - Manual (Page 127)

AT-WL2411 Version 1.80 Installation and User’s Guide
127
To Configure the 802.11b Radio
The IEEE 802.11b radio will communicate with other 802.11b radios that
have the same SSID (Network Name) and security. For help, refer to
Configuring Security on page 135.
To configure the 802.11b radio, perform the following procedure:
1. From the Main Menu, select IEEE 802.11b Radio. The IEEE 802.11b
Radio screen as shown in Figure 52 is displayed.
Figure 52 IEEE 802.11b Radio Screen
2. Configure the parameters for the radio. The radio parameters are
described below:
Node Type
Configure the 802.11b radio as a master or station. You can also
disable the radio.