Allied Telesis AT-WL2411 - Manual (Page 42)

Configuration Overview
42
4. In the 802.11b Radio Menu, configure the parameters. These
parameters are described below.
(SSID) Network Name
The network name. All 802.11b radios must have the same
network name to communicate.
Frequency
The frequency appropriate for your installation. Frequencies
range from 2.4 to 2.5 GHz and depend on the specific country.
5. Save the configurations by using the Save Configuration option and
reboot the access point to activate your changes.
Now that the access point has an IP Address, you can configure it
remotely using the procedures in the next sections.