Allied Telesis AT-WL2411 User Manual
Page 140
Configuring Security
140
3. Enable or disable the access methods that users can use to connect to
the access point. These methods are described below.
Browser Access
Determines if users can use a web browser to configure or
manage this access point. Browser access is through either port 80
or port 443.
Choose Secure-Only if you want to force users to log in using the
secure web browser (HTTPS) interface. Secure-only access is
through port 443. This feature is only available on the newer
access points AT-WL2411.
Allow Telnet Access
Determines if users can use a telnet session (or a communications
program) to configure or manage this access point. Telnet access
is through port 23.
Allow SNMP Access
Determines if users can use SNMP management station to
configure or manage this access point. SNMP access is through
port 161.
Allow ICMP Configuration
Determines if users can use the a program that uses ICMP echo
(PING) to set the IP address or restore factory defaults on this
access point.
4. Click Submit Changes to save your changes. To activate your
changes, select Save/Discard Changes from the menu bar then Save
Changes and Reboot. For help, see