Allied Telesis AT-WL2411 - Manual (Page 149)

AT-WL2411 Version 1.80 Installation and User’s Guide
149
1. From the Main Menu, click Security then IEEE 802.11b Radio. The
appropriate radio screen like the one in Figure 57 is displayed.
Figure 57 An example of a Radio Screen
2. Check the Enable WEP Encryption box then Submit Changes.
3. Configure the parameters for WEP configuration. To ensure
maximum security, configure each WEP key with a different WEP
code. The WEP parameters are described below.
Enable WEP Encryption
Determines if you are using WEP 64/128 security. Check this check
box.
Allow Unencrypted Clients
Determines if the access point will receive transmissions from
wireless end devices that are not using WEP encryption. Check
this check box to accept transmissions from devices that are not
using WEP encryption. Clear this check box to block transmissions
from end devices that are not using WEP encryption.