Allied Telesis AT-WL2411 - Manual (Page 164)

Access Point Maintenance
164
Restoring the Default Settings
If you need to restore the access point to the factory default settings.
This can be done using the Web browser interface. For a list of the
default settings, see
Default Configuration Settings on page 209. To
restore the default configuration, perform the following procedure:
1. In the menu bar, select Save/Discard Changes. The Changes screen
as shown in Figure 63 is displayed.
Figure 64 Changes Screen
2. Select Restore Factory Defaults. Under Pending Changes, you will
see a list of what parameters need to be changed.